VHB Adhesive Landing Pads
VHB Adhesive Landing Pads
VHB Adhesive Landing Pads
VHB Adhesive Landing Pads
VHB Adhesive Landing Pads
VHB Adhesive Landing Pads

VHB Adhesive Landing Pads

$50.00

2 reviews
Free Shipping
Over $175 (U.S. Only) 🇺🇸
Description

Set of 4 x VHB landing pads with threaded inset (M6) allowing for easy fixed attachment to TRIO mounts.

Allow you to secure your starlink to fiberglass RV/camper roofs, aluminum truck cabs, boat decks, glass sunroofs etc.

This is a great permanent mounting option.

Kit includes:

  • 4x diecut genuine 3M 5952 heavy duty VHB circles mounted to thermoplastic bases with threaded inserts.
  • Alcohol wipes for surface preparation
  • Bolt size to fit your mount chosen from drop-down menu

Please refer to 3M installation instructions on page 7. NOTE: If you have a curved roof, the mount itself has slight flex but you may need to use our swivel leg adapters for maximum surface area contact when using rubber coated magnets, VHB landing pads, or suction cups. Please add to your order if required.
Installation

1. Feed bolts (blue loctite already applied) through spaces at each of the 4 feet on the TRIO Flatmount

2. Thread the screws into the landing pads and tighten using the allen key supplied.

3. PLEASE NOTE: the mounting substrate that your landing pads will be stuck to should be non-porous and smooth. It is recommended to lightly scuff the surface you will be sticking the VHB discs to using a scotch pad. HOWEVER, do this at your discretion as doing so will scratch the finish of your mounting surface. Use isopropyl alcohol wipes to clean the scuffed surface you wish to secure the VHB pads onto.

4. Remove the red VHB sticker cover and carefully place the flatmount (with the exposed VHB pads) onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE/BOAT/RV ETC.

5. Apply firm pressure through the mounting feet to ensure adhesion. If possible, place heavy object on top of the mount for 24 hrs to optimize adhesion (ideal application temperature is 70-100F).

6. Slide the Starlink dish onto the TRIO Flatmount until it clicks firmly into place and make sure it is secure… and enjoy your internet!

NOTE: Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Important Information

⚠ Using Starlink™ in motion may violate your Terms of Service depending on your service location. Consult your Terms of Service to determine if this applies to you.

⚠ Given the varying conditions of surfaces this can be mounted to, it is ultimately up to the end user to make sure the antenna mount is sufficiently secured. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.
Returns and Warranty

See our warranty here: Warranty
View details
•  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸
•  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸  •  FREE SHIPPING OVER $175 (U.S. ONLY)🇺🇸