Standard Suction Cups
Standard Suction Cups
Standard Suction Cups
Standard Suction Cups
Standard Suction Cups
Standard Suction Cups
Standard Suction Cups
Standard Suction Cups
Standard Suction Cups

Standard Suction Cups

$99.00

Free shipping on orders over $175.
Description

Standard Suction Cups

No-drill mounting for smooth surfaces, built for interior and everyday use. The go-to choice for sunroof setups.

This set of four suction cups secures your TRIO mount to smooth, non-porous surfaces. Each cup holds 45 lb. Pair them with a Mini Speedmount to mount your Starlink Mini inside a vehicle sunroof for a clean, protected install.

M6 female threads bolt the cups straight onto your mount. Fully removable, so you can reposition or move your setup whenever you need to.

Works as a replacement set or an upgrade for compatible TRIO mounts.

Pump and confirm Press the pump until the colored indicator band disappears. That is your visual proof of a full seal. No guessing.

Curved or angled surface For curved or uneven surfaces, pair the cups with Swivel Leg Adapters so each cup sits flush for full contact.

Need more hold? For high-speed, exterior, or extreme use, step up to the Heavy Duty Suction Cups at 65 lb each.

Specs

  • Set of 4
  • Holding force: 45 lb each
  • Dimensions: 3" diameter x 2" high
  • M6 female threads
Installation

Installation

  1. Feed the bolts through the openings at each of the four feet on the TRIO mount.
  2. Thread the bolts into the suction cups and tighten with the supplied allen key.
  3. Confirm your mounting surface is smooth, non-porous, and clean. Inspect the cups so they too are free of dirt and debris.
  4. Set the mount with the cups onto the cleaned surface. Point the TRIO logo and dish cord toward the back (trailing edge) of your vehicle or boat.
  5. Apply gentle downward pressure so the full edge of each cup contacts the surface. Press each pump repeatedly until the colored indicator band completely disappears.
  6. Slide the Starlink dish onto the mount until it clicks firmly into place. Confirm it is secure. You are online.

Removing the cups
Pull either tab on the top of a vacuum pad up and toward the center. This lifts the edge of the pad, breaks the seal, and releases the mount.

Maintenance
Check the suction on each cup every 24 to 48 hours, or with every 20°F of temperature change. A quick reset keeps the hold strong.

IMPORTANT NOTE: Many factors beyond TRIO Flatmount's control and uniquely within the user's knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, the user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for the user's method of application. Suction cups should be checked for suction every 24 to 48 hours.
Warranty

See our warranty here: Warranty
View details
Standard Suction Cups

TRIO Lifetime Guarantee

Learn More

Frequently Asked Questions

What are the Standard Suction Cups used for?

The Standard Suction Cups are replacement cups for TRIO mounts, sold as a set of four, for interior or everyday use. They hold 45 lb each.
Can I use the Standard Suction Cups inside my vehicle?

Yes. Pair the Standard Suction Cups with a Mini Speedmount to mount your Starlink Mini inside a sunroof.
How often should I check the Standard Suction Cups?

Check the Standard Suction Cups every 24 to 48 hours, or with every 20°F of temperature change. Make sure each cup sits flush with full contact.
What size are the Standard Suction Cups?

The Standard Suction Cups are 3 inches in diameter and 2 inches high, with M6 female threads.