Mini Speedmount

Regular price $150.00

71 reviews

Free shipping on orders over $175.


Color: White

Complete your set up.
Description

The Starlink TRIO Mini Mount: Built for the Road

The TRIO Mini Speedmount is a Starlink mini mount specially engineered for vehicles and mobile setups, giving you the most out of your Starlink Mini.

At 1.8" in height, it's the lowest profile mounting solution available in the world for the Starlink Mini. The TRIO Starlink Mini Mount fortifies the dish from all sides without interfering with any original equipment manufacturer (OEM) features, and is safety graded for highway speeds*.

TRIO-Grade Features:

  • Safety tested up to 120 mph

  • No drill

  • Snowmelt protection

  • Heat-transfer optimization

  • Signal performance prioritization

Compatible With: Starlink Mini UTA-231 and all sub-versions

Colors: Available in “Black” and “White”.

Optional Add-ons: 4.5mm Polycarbonate/Lexan cover gives added protection against hail, branches, and debris without reducing signal strength.

To Assemble**: Simply slide the two pieces into place around your Starlink Mini dish. Tighten the SS bolts into the SS nylon locknuts. You’re done!

*Tested for speeds up to 120 mph/190 km/h. Always ensure mounting accessories are secured appropriately for your specific application and surface.

**For a detailed walkthrough, see our full TRIO Mini Speedmount installation guide.

Built Differently, By Design.

Built for Vehicle Use

Tested at speeds up to 120 mph/190 km/h with Rubber-Coated Magnets. Trusted by civilian and public sector operators. The TRIO Mini Speedmount keeps your Starlink secure through virtually all wind, weather, and off-road conditions.

Fast & Simple Installation

TRIO’s two-piece design slides into place around any Starlink Mini dish. Tighten two stainless steel bolts, and it's done! Eight optional mounting holes give you flexibility for any surface or application. One 4mm hex key is all the tooling you need.

Durable Construction

Heavy-duty injection molded ASA plastic with UV resistance. Rated from -40°F to 150°F (-40°C to 65°C). Drain holes prevent water buildup on the dish surface. The open-top design keeps the OEM surface fully exposed, signal and heat transfer completely unhindered.

Optional 4.5mm Polycarbonate/Lexan cover adds protection against hail, branches, and debris without reducing signal strength.

One Mount. Every Vehicle.

RVs

A dedicated Starlink mini RV mount that works on fiberglass and aluminum rooftops. VHB Landing Pads provide a permanent solution rated at 440 lbs. of total holding force. Magnets remain forever removable and tool-free.

Vans & Overlanders

For van conversions and overland rigs, clean installation matters. The TRIO Mini Speedmount sits tight to the roof and keeps the dish protected during travel, and comes off just as fast as it went on, ideal for builds where travel flexibility is non-negotiable.

Trucks

The TRIO Mini Speedmount is the Starlink mini truck mount for serious builds. Low-profile and form-fitting, it won't snag on branches or clearance bars. Works with magnetic, suction, VHB, or through-bolt attachment, whatever your rig needs.

Cars & Boats

Running Starlink on a car or boat? The TRIO Mini Speedmount installs in minutes with Heavy Duty Suction Cups. No drilling, no damage.

Powering it from the vehicle? The Mini 12V power cable runs the dish straight off 12v. You can also browse all Starlink Mini products to see every mount and accessory that fits.

Installation

The TRIO Mini Speedmount installs without special tools or professional help. Here's how it works:

  • Choose your mounting accessory: magnets, suction cups, VHB pads, or through bolts.
  • Slide the two Speedmount components around your Starlink Mini dish.
  • Tighten the included M6 stainless steel bolts with a 4mm hex key.
  • Attach to your vehicle surface. Done!

For a detailed walkthrough, see our full TRIO Mini Speedmount installation guide:

→ TRIO Mini Speedmount Installation Guide  |  Explore Other Starlink Mounts

Frequently Asked Questions

What Starlink dishes is the TRIO Mini Speedmount compatible with?

The TRIO Mini Speedmount is designed exclusively for the Starlink Mini (UTA-231 and all sub versions). For Gen 3 Standard or Performance dish mounts, see TRIO's other starlink mounts.

What mounting options are available?

Six options: Rubber-Coated Magnets (most popular: 240 lbs. total holding force, tested to 120 mph), Heavy-Duty Suction Cups (no-drill, removable), VHB Landing Pads (permanent, 440 lbs. total force), VHB Discs (creates a magnetic surface on non-magnetic substrates), Through Bolt Kit (roof rack or sheet metal), and Swivel Leg Adaptors (for curved or angled surfaces).

Will the mount affect my Starlink signal or snowmelt function?

No. The open-top design leaves the OEM Starlink surface fully exposed. Snowmelt, heat transfer, and signal performance are all unaffected. The optional Polycarbonate Cover also does not reduce signal strength.

Can I use the Starlink OEM kickstand or pole mount at the same time?

Yes. The TRIO Mini Speedmount is designed to allow simultaneous use of the Starlink OEM kickstand and pole mount.

Is this mount safe for high-speed driving?

Yes. The TRIO Mini Speedmount has been tested with Rubber-Coated Magnets at speeds up to 120 mph/190 km/h. Always ensure mounting accessories are secured appropriately for your specific application and surface.

How do I choose the right Starlink mini mounting option?

For most vehicle applications, Rubber-Coated Magnets are the go-to: fast to deploy, removable, and graded for most highway speeds. For permanent RV or camper installations, VHB Landing Pads are the recommended choice. See our guide to choose the best Starlink mount for your setup.

Specifications

Compatibility: Starlink Mini UTA-231 and all sub versions
Material: ASA UV Resistant Injection Molded Plastic
Weight: 1.8 lbs. (~816 grams)
Dimensions: 321 mm × 283 mm × 46 mm
Install Height: 1.8"/45 mm (1.9" with Rubber-Coated Magnets)
Temperature Range: -40°F to 150°F (-40°C to 65°C)
Colors: Black (MINI-SPM-BLK) | White (MINI-SPM-WHT)
Included: 2-piece TRIO Mini Speedmount, 2× M6 30mm SS Bolts, 2× M6 SS Nylock Locknuts, 4mm Hex Key
Additional Mounting Options: Rubber-Coated Magnets, Heavy-Duty Suction Cups, VHB Landing Pads, VHB Discs, Through Bolt Kit, Swivel Leg Adaptors
Optional Add-On: 4.5mm Polycarbonate/Lexan Protective Cover

Mounting Heights

Rubber-Coated Magnets (inner)
1 7/8" (48 mm)

Rubber-Coated Magnets (outer)
2 1/4" (57 mm)

Heavy-Duty Suction Cup
4 1/8" (106 mm)

Through Bolting
1 13/16" (47 mm)
Starlink Mini (UTA-231 and all sub-versions)

Operating Temperature:
-40°F to 150°F (-40°C to 65°C)

Material:
UV-Resistant ASA Injection Molded Plastic

Important Information

⚠ Using Starlink™ in motion may violate your Terms of Service depending on your service location. Consult your Terms of Service to determine if this applies to you.

⚠ Given the varying conditions of surfaces this can be mounted to, it is ultimately up to the end user to make sure the antenna mount is sufficiently secured. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.

Non-Flat or Ridged Roof? Read This Before Mounting

If your vehicle's roof has raised ridges or contours, any attachment may not achieve full contact with the roof surface, and full contact is required for a secure hold. Without it, the mount can detach at highway speeds. If your roof has ridges, we recommend:

  • Ensuring all attachment points are flush and fully in contact with the roof before driving
  • Testing the mount at low speeds before highway use

Not sure if your setup is compatible? Reach out before purchasing at contact@trioflatmount.com and we'll help you find the right solution.

TRIO Lifetime Guarantee

The Guarantee

Peace of Mind, Everywhere

  • Lifetime Coverage

    Every TRIO mount in our lineup is backed for life.

  • Industry-First Coverage

    No other Starlink mount brand backs their product like this.

  • Direct Purchase Only

    Covers all purchases directly from trioflatmount.com.

Installation of a Mini Speedmount on Starlink Mini
Play

Frequently Asked Questions

Will the Mini Speedmount hold in high winds and dusty conditions?

Yes. The Mini Speedmount is engineered and tested for high-wind and rough-condition use. As long as you've installed it on a clean surface and the mount doesn't budge when you give it a firm push, you're good to go. If you've chosen suction cups as your attachment method, give the suction a quick check before any drive.

I'm mounting to an aluminum surface. What attachment should I use for the Mini Speedmount?

Attaching the Mini Speedmount on an aluminum body, you've got a few options depending on how permanent you want the install. Aluminum is non-ferrous, so:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.

I'm mounting on a fiberglass roof. How do I attach the Mini Speedmount?

Attaching the Mini Speedmount on a fiberglass roof, you've got a few options since fiberglass is also non-ferrous, same setup as aluminum:

For a permanent install, use our VHB Adhesive Landing Pads. They bond directly to the fiberglass.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the fiberglass, and the magnet locks onto the disc.

Heavy-Duty Suction Cups also work if you want a fully removable setup.

Are the magnets strong enough?

Yes. Each magnet has 60 lbs of holding force, so all 4 magnets together hold up to 240 lbs. To remove them, slide them side to side with a bit of force rather than pulling straight up.

I have a curved roof. What do I use for the Mini Speedmount?

Go with our Swivel Leg Mount Adapters. Each leg gets independent movement so the mount can conform to a curved surface and sit flush without rocking.

I have a Ford with an aluminum roof. Will the Mini Speedmount work?

Attaching the Mini Speedmount on a Ford roof, most Ford trucks newer than 2016 have an aluminum roof, which is non-ferrous, so you've got a few options depending on how permanent you want the install:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.

Yes, the Mini Speedmount will hold if you choose one of the above.

Can the Mini Speedmount go through a car wash?

We don't recommend it. The mount is built to handle weather and road grime, but automatic car washes put extra stress on the dish and attachment points with high-pressure jets and rotating brushes. Remove the dish (and the Mini Speedmount if you're going through a touchless or brush wash) before you head in, then reinstall once you're out.

How do I power the Mini Speedmount?

Use our Mini 12V DC Power Cable. It's heavy-duty and low-profile enough that you can close a door on it without crushing the cable.

Available in 10ft and 15ft lengths. End options are bare wire leads, ring terminals, or a cigarette lighter plug. The cigarette lighter plug is our most popular.

Does the Mini Speedmount come with attachments?

No, the Mini Speedmount doesn't come with attachments. You pick the attachment method separately so it fits your vehicle and use case. Options include Rubber-Coated Magnets, VHB Metal Discs, VHB Adhesive Landing Pads, Heavy-Duty Suction Cups, and Swivel Leg Mount Adapters.

How do I protect the dish from falling branches or debris?

Use our Polycarbonate Cover. It's a clear, impact-resistant shield that installs over the Mini Speedmount and protects the dish from falling branches, debris, and hail. Tough enough to take a hit, clear enough to let the signal through without interference.

Do you have a guarantee?

Yes. Every TRIO mount purchased directly from trioflatmount.com is covered by our TRIO Lifetime Guarantee. If your mount ever fails, send photos or video of the issue along with your order number to contact@trioflatmount.com and we'll take care of it.

  • 5 stars: 62 (87%)
  • 4 stars: 3 (4%)
  • 3 stars: 4 (6%)
  • 2 stars: 0 (0%)
  • 1 star: 2 (3%)
B
Brett (United States)
Survived 80mph, washboards, and tree branches, the ultimate rig-to-rig mount!

Before finding Trio, we were using a cheap magnetic mount from Amazon. It was flimsy, the bolts constantly backed out, and routing the cable through the door was a nightmare. We needed a professional roof-mounted solution for our 4x4 Ford E350 van, but our fiberglass high-top isn’t flat. The Trio Flatmount with the adjustable wobble legs was the absolute perfect solution. We mounted it on the curved rear of the roof and took it to the SoCal desert. It survived 80mph highway speeds, heavy washboards, and hard G-outs without moving an inch, all while delivering flawless in-motion internet.

But the real magic of this magnetic system is its versatility. We take our Starlink Mini from rig to rig depending on the job. I popped the Trio mount off the van and slapped it onto our 4th Gen 4Runner for a 2-week backcountry mapping trip in the Nevada desert. I put it through absolute hell. Between the bone-rattling dirt roads and physically scraping the dish directly under low-hanging pinyon pines and juniper branches, I tried my hardest to defeat it. I could not bounce, rattle, or scrape this thing off the roof. It is incredibly robust, and the fact that they offer a lifetime guarantee makes this an absolute no-brainer. If you are a serious overlander or full-time traveler, this is the only mount you should buy. 10/10.
- Brett, @ourOverlandLife

Brett, this is exactly what we build for. Rig-to-rig flexibility on rough terrain is where the magnetic system earns its keep, and Nevada backcountry is no joke. Glad it held through everything you threw at it. The lifetime guarantee has your back for the long haul. Looking forward to seeing where you take it next.

The TRIO Team

C
Colin Rex (United States)
Game Changer for Photo Missions!

As a commercial photographer who's constantly working on the road, few pieces of my kit have elevated capabilities as much as my Trio Flatmount has. Besides being well-designed and engineered to fit the Starlink Mini snugly and securely, it's completely straightforward to use and allows me to stay connected in the middle of nowhere. Couldn't recommend more!

www.colinrex.com

That means a lot Colin, especially coming from someone who depends on their gear for work. Staying connected in the middle of nowhere is exactly what the Mini Speedmount is built for. Appreciate you sharing this and glad it's been a solid part of your kit on the road!

F
Frank S (United States)
Mount seems sturdy and it will get tested off-road soon

Mount seems sturdy and it will get tested off-road soon, only issue is the magnetic mounting was either missing washers or the screws were too long.

Hi Frank, thank you for the feedback, and glad to hear the mount feels solid.

We’ve just sent you an email to get a bit more detail on the magnetic hardware. Once we confirm, we’ll get the correct hardware out to you immediately.

J
Jamie Bally (United States)
Great quality and easy to install

Great quality and easy to install. Magnets and mounting discs are very strong and secure on my fiberglass RV roof.

Thanks so much for the kind words! We’re glad to hear the install was easy and that the magnets and mounting discs feel solid and secure on your RV roof. That’s exactly what we designed them for. Appreciate you choosing TRIO and sharing your experience.

C
Christopher Dena (United States)
Simply Awesome

I am ecstatic to have purchased the MINI SPEEDMOUNT for my 2022 4 Door Bronco Badlands.
I think its a great design. It has a very well constructed sturdy feel. It looks and feels made from quality materials, its easy to assemble, it has a nice low profile look, no functionality issues on and off highway, its portable and convenient.
Trio has great responsive customer service too!
Thank you!

Thanks so much for the great feedback! We’re glad the Mini Speedmount has been a perfect fit and that you’re happy with the design, performance, and ease of use. We really appreciate your support and kind words about our customer service.

E
Eric Jackson (United States)
Even Jeremy Clarkson can put it together without getting hammers involved. Very sturdy too.

Very easy to put together. In fact, Jeremy Clarkson can probably put it together without getting hammers involved.
Also very sturdy as well. I ran some high speed bumpy/ whoopy/ and choppy sections in the desert with this installed, and it didn't even move a bit. If it's good for handling Baja speed, it is more than capable to handle whatever else you throw at it! Highly Recommended.

D
Darrell Connelly (United States)
The mount is excellent.

The mount is excellent. The install was easy and the rubber coated magnets are uber strong.

T
Tony (United States)
Strong magnets and low profile, works like a champ!

Recently took a 350 mile trip in Alaska with the speed mount magnetized to the trunk of my BMW M4. The starlink worked perfectly and the mount didn’t slide or move one bit from high speeds or the bumpy, sometimes jumpy, Alaskan highways. Very happy with my purchase!

W
Will (United States)
Fits like a glove

Perfect fit. Love the high quality bolts to secure the Starlink, ensuring a tight fit and noting that will come loose or break off. The brackets are thick enough to last while still being lightweight.

G
Gregory S (United States)
Great product!

Works as advertised, super easy setup with my Storyteller!

C
Chris Staggers (United States)
Awesome Products and Support

Love my TRIO Flatmount Starlink Mini Mount. Josh with TRIO was amazing to work with to help pick out the right products for my application. The mounting system is great quality and worth every penny. Best mounting system on the market.

B
Bill Blackburn (United States)
Perfect fit

Works well and should hold up well.

R
Rodney Silva (United States)
seems solid.

I know there are like 3d printed? maybe? its still solid. kind of wish the bottom was more covered for the weather protection but so fat so good. i switch it back and forth with dash and roof locations. rubber magnets work good for anti-slide feet.

M
Matthew Dopp (United States)
Great product for marine application.

Worked great on my first boating trip. Good quality thru bolt hardware. Held up to white water spray and highway speeds.

M
Matthew Dopp (United States)
Great product for marine application.

Worked great on my first boating trip. Good quality thru bolt hardware. Held up to white water spray and highway speeds.

A
Alicia Le Pard (United States)
Mini SpeedMount

Overall, what a nice unit! Certainly will protect the Starlink Mini. Little concerned that the magnets are so strong I will never get it removed as I planned., to move from vehicle to vehicle...but absolutely no worries that it will fail at highway speeds. Can you spot it sitting up top there....

D
David McDonald (United States)
Excellent mount for class B rv

I purchased this mount for my RV.

Installation was very easy, just needed to run the wire into the cabin and plug it in. Assembling the unit was very easy, just a couple bolts to hold the two pieces of the mount together. I chose the magnetic option and just needed to screw the magnets into the mount, super easy.

Performance has been great with a clear sky, there’s no obstructions and I don’t have to bother setting it up as long as I’m not parked under a tree. I drove about 8 hours on the interstate 65-70mph and no problems with the mounts stability or anything. It’s very low profile and not really visible from outside the RV.

The way it’s installed, if I need to get it off the roof because of obstructions, only takes a couple minutes to lift it off and disconnect the cable. I purchased an extra cable from Amazon so I can leave the cable on the roof full time.

Overall I’m very pleased with the product’s performance. It fits my needs well and I expect it to last years.

D
Devin Holzer (United States)
Love it!

I love my speed mount. It really helps protect the mini, easy to assemble, well-made and sturdy. I also really like the plexiglass cover and I’m glad I chose to add it, but we will see how long that lasts before I scratch it up lol. For those who are wondering, the cover doesn’t seem to affect speeds really at all.

Super happy with my purchase and the support at Trio flat mount is excellent, which is rare these days and very much appreciated. Thanks Tim & trio team!