Essential Adhesive Kit - Mini Flatmount

The discs bond down for good. The dish lifts off whenever you want.

The TRIO Mini Flatmount Adhesive Kit is the perfect low-profile solution for mounting your Starlink Mini dish securely, cleanly, and without drilling. With VHB Adhesive-Backed Magnet Mounting Discs, our Rubber-Coated Magnet Set, and a dependable 12V DC power connection, you can build a reliable installation on RVs, vans, trailers, boats, and almost any flat or slightly curved surface. Click your dish into the Mini Flatmount, bond the discs, let the adhesive cure, power up with the 12V cable, and your Mini is ready for everyday use.

The Mini Flatmount is manufactured using industrial-grade ASA injection molding, making it durable and weather-resistant for long-term installations in any environment. It is designed for use on Vans, RVs, Box Trucks, Campers, Boats, Sailboats, SUVs, and overland rigs, while still being compact enough for temporary setups or creative mounting solutions.

Here is how this kit works. The mounting discs bond to your surface with 3M industrial-strength VHB adhesive. That bond is permanent, so mark your placement and get it right the first time. The discs turn the surface into a magnetic landing zone. The Rubber-Coated Magnets then sit on top of the discs and hold the mount down. The magnets are the part that comes off. Lift the dish for storage, service, a low garage, or winter layup, then drop it back in seconds with no tools and no adhesive to replace.

On bare or painted steel you can skip the discs and set the magnets straight onto the surface. Use the discs for fiberglass, aluminum, painted metal, and composite surfaces where a magnet has nothing to grab.

NOTE: If you have a curved roof, the mount has slight built-in flex, but optimal contact may require our Swivel Leg Mount Adapters. These help maximize surface area contact when using mounting discs, magnets, or suction cups. Add to your order if needed.

TRIO-Grade Features:

• Safety tested at highway speeds
• No drill
• Snowmelt protection
• Heat-transfer optimization
• Signal performance prioritization

What’s Inside the Kit

Mini Flatmount

A durable, low-profile mounting base designed specifically for the Starlink Mini.

Industrial-grade ASA injection molding
Low profile for stealth and minimal wind exposure
Secure click-in design for the Starlink Mini dish
Suitable for long-term or temporary installations
Compatible with straps for backpack-mounted use
Ideal for Vans, RVs, trucks, boats, campers, and overland rigs

VHB Adhesive-Backed Magnet Mounting Discs

Turn a non-magnetic surface into a magnetic mounting point.

Weatherproof steel discs backed with 3M industrial-strength VHB adhesive
Safe for fiberglass, aluminum, painted metal, and composite surfaces
Permanent bond once cured, so confirm your placement before pressing down
Weather-resistant and vibration-resistant
Creates a strong, low-profile magnetic base for the Mini Flatmount

Rubber-Coated Magnet Set

Strong holding force with a paint-safe grip.

Holds securely at highway speeds when properly placed
Sits on top of the mounting discs, or straight onto a bare or painted steel surface
Rubber-coated to protect your vehicle’s finish
Drops on and lifts off in seconds, no tools required
Ideal for RVs, vans, trailers, marine cabins, and overland rigs

Mini 12V DC Power Cable

Powers the Starlink Mini directly from your vehicle.

10 ft cable with a standard 12V cigarette lighter plug
More efficient than running an inverter
Plug-and-play, ideal for driving days, remote work, or off-grid travel