Mini Speedmount
White
White
White
White
Black
Black
Black
Black
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups

Mini Speedmount

$150.00

63 reviews

Compatible with Starlink Mini

Free shipping on orders over $175.

Color: White
Complete your set up.
Description

The Starlink TRIO Mini Mount: Built for the Road

The TRIO Mini Speedmount is a Starlink mini mount specially engineered for vehicles and mobile setups, giving you the most out of your Starlink Mini.

At 1.8" in height, it's the lowest profile mounting solution available in the world for the Starlink Mini. The TRIO Starlink Mini Mount fortifies the dish from all sides without interfering with any original equipment manufacturer (OEM) features, and is safety graded for highway speeds*.

TRIO-Grade Features: 

  • Safety tested up to 120 mph

  • No drill

  • Snowmelt protection

  • Heat-transfer optimization

  • Signal performance prioritization

Compatible With: Starlink Mini UTA-231 and all sub-versions 

Colors: Available in “Black” and “White”.

Optional Add-ons: 4.5mm Polycarbonate/Lexan cover gives added protection against hail, branches, and debris without reducing signal strength.

To Assemble**: Simply slide the two pieces into place around your Starlink Mini dish. Tighten the SS bolts into the SS nylon locknuts. You’re done!

*Tested for speeds up to 120 mph/190 km/h. Always ensure mounting accessories are secured appropriately for your specific application and surface.

**For a detailed walkthrough, see our full TRIO Mini Speedmount installation guide.

Built Differently, By Design.

Built for Vehicle Use

Tested at speeds up to 120 mph/190 km/h with Rubber-Coated Magnets. Trusted by civilian and public sector operators. The TRIO Mini Speedmount keeps your Starlink secure through virtually all wind, weather, and off-road conditions.

Fast & Simple Installation

TRIO’s two-piece design slides into place around any Starlink Mini dish. Tighten two stainless steel bolts, and it's done! Eight optional mounting holes give you flexibility for any surface or application. One 4mm hex key is all the tooling you need.

Durable Construction

Heavy-duty injection molded ASA plastic with UV resistance. Rated from -40°F to 150°F (-40°C to 65°C). Drain holes prevent water buildup on the dish surface. The open-top design keeps the OEM surface fully exposed, signal and heat transfer completely unhindered. 

Optional 4.5mm Polycarbonate/Lexan cover adds protection against hail, branches, and debris without reducing signal strength.

One Mount. Every Vehicle.

RVs

A dedicated Starlink mini RV mount that works on fiberglass and aluminum rooftops. VHB Landing Pads provide a permanent solution rated at 440 lbs. of total holding force. Magnets remain forever removable and tool-free.

Vans & Overlanders

For van conversions and overland rigs, clean installation matters. The TRIO Mini Speedmount sits tight to the roof and keeps the dish protected during travel, and comes off just as fast as it went on, ideal for builds where travel flexibility is non-negotiable.

Trucks

The TRIO Mini Speedmount is the Starlink mini truck mount for serious builds. Low-profile and form-fitting, it won't snag on branches or clearance bars. Works with magnetic, suction, VHB, or through-bolt attachment, whatever your rig needs.

Cars & Boats

Running Starlink on a car or boat? The TRIO Mini Speedmount installs in minutes with Heavy Duty Suction Cups. No drilling, no damage. 
Installation

The TRIO Mini Speedmount installs without special tools or professional help. Here's how it works:

  • Choose your mounting accessory: magnets, suction cups, VHB pads, or through bolts.
  • Slide the two Speedmount components around your Starlink Mini dish.
  • Tighten the included M6 stainless steel bolts with a 4mm hex key.
  • Attach to your vehicle surface. Done!

For a detailed walkthrough, see our full TRIO Mini Speedmount installation guide:

→ TRIO Mini Speedmount Installation Guide  |  Explore Other Starlink Mounts

Frequently Asked Questions

What Starlink dishes is the TRIO Mini Speedmount compatible with?

The TRIO Mini Speedmount is designed exclusively for the Starlink Mini (UTA-231 and all sub versions). For Gen 3 Standard or Performance dish mounts, see TRIO's other starlink mounts.

What mounting options are available?

Six options: Rubber-Coated Magnets (most popular: 240 lbs. total holding force, tested to 120 mph), Heavy-Duty Suction Cups (no-drill, removable), VHB Landing Pads (permanent, 440 lbs. total force), VHB Discs (creates a magnetic surface on non-magnetic substrates), Through Bolt Kit (roof rack or sheet metal), and Swivel Leg Adaptors (for curved or angled surfaces).

Will the mount affect my Starlink signal or snowmelt function?

No. The open-top design leaves the OEM Starlink surface fully exposed. Snowmelt, heat transfer, and signal performance are all unaffected. The optional Polycarbonate Cover also does not reduce signal strength.

Can I use the Starlink OEM kickstand or pole mount at the same time?

Yes. The TRIO Mini Speedmount is designed to allow simultaneous use of the Starlink OEM kickstand and pole mount.

Is this mount safe for high-speed driving?

Yes. The TRIO Mini Speedmount has been tested with Rubber-Coated Magnets at speeds up to 120 mph/190 km/h. Always ensure mounting accessories are secured appropriately for your specific application and surface.

How do I choose the right Starlink mini mounting option?

For most vehicle applications, Rubber-Coated Magnets are the go-to: fast to deploy, removable, and graded for most highway speeds. For permanent RV or camper installations, VHB Landing Pads are the recommended choice. See our guide to choose the best Starlink mount for your setup.
Specifications

Compatibility: Starlink Mini UTA-231 and all sub versions
Material: ASA UV Resistant Injection Molded Plastic
Weight: 1.8 lbs. (~816 grams)
Dimensions: 321 mm × 283 mm × 46 mm
Install Height: 1.8"/45 mm (1.9" with Rubber-Coated Magnets)
Temperature Range: -40°F to 150°F (-40°C to 65°C)
Colors: Black (MINI-SPM-BLK) | White (MINI-SPM-WHT)
Included: 2-piece TRIO Mini Speedmount, 2× M6 30mm SS Bolts, 2× M6 SS Nylock Locknuts, 4mm Hex Key
Additional Mounting Options: Rubber-Coated Magnets, Heavy-Duty Suction Cups, VHB Landing Pads, VHB Discs, Through Bolt Kit, Swivel Leg Adaptors
Optional Add-On: 4.5mm Polycarbonate/Lexan Protective Cover

Mounting Heights

Rubber-Coated Magnets (inner)
1 7/8" (48 mm)

Rubber-Coated Magnets (outer)
2 1/4" (57 mm)

Heavy-Duty Suction Cup
4 1/8" (106 mm)

Through Bolting
1 13/16" (47 mm)
Starlink Mini (UTA-231 and all sub-versions)

Operating Temperature:
-40°F to 150°F (-40°C to 65°C)

Material:
UV-Resistant ASA Injection Molded Plastic
Important Information

⚠ Using Starlink™ in motion may violate your Terms of Service depending on your service location. Consult your Terms of Service to determine if this applies to you.

⚠ Given the varying conditions of surfaces this can be mounted to, it is ultimately up to the end user to make sure the antenna mount is sufficiently secured. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.
Non-Flat or Ridged Roof? Read This Before Mounting

If your vehicle's roof has raised ridges or contours, any attachment may not achieve full contact with the roof surface, and full contact is required for a secure hold. Without it, the mount can detach at highway speeds. If your roof has ridges, we recommend:

  • Ensuring all attachment points are flush and fully in contact with the roof before driving
  • Testing the mount at low speeds before highway use

Not sure if your setup is compatible? Reach out before purchasing at contact@trioflatmount.com and we'll help you find the right solution.
View details
Mini Speedmount

TRIO Lifetime Guarantee

Read more about the TRIO Lifetime Guarantee.

Learn More
Installation of a Mini Speedmount on Starlink Mini

Frequently Asked Questions

Will the Mini Speedmount hold in high winds and dusty conditions?

Yes. The Mini Speedmount is engineered and tested for high-wind and rough-condition use. As long as you've installed it on a clean surface and the mount doesn't budge when you give it a firm push, you're good to go. If you've chosen suction cups as your attachment method, give the suction a quick check before any drive.
I'm mounting to an aluminum surface. What attachment should I use for the Mini Speedmount?

Attaching the Mini Speedmount on an aluminum body, you've got a few options depending on how permanent you want the install. Aluminum is non-ferrous, so:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.
I'm mounting on a fiberglass roof. How do I attach the Mini Speedmount?

Attaching the Mini Speedmount on a fiberglass roof, you've got a few options since fiberglass is also non-ferrous, same setup as aluminum:

For a permanent install, use our VHB Adhesive Landing Pads. They bond directly to the fiberglass.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the fiberglass, and the magnet locks onto the disc.

Heavy-Duty Suction Cups also work if you want a fully removable setup.
Are the magnets strong enough?

Yes. Each magnet has 60 lbs of holding force, so all 4 magnets together hold up to 240 lbs. To remove them, slide them side to side with a bit of force rather than pulling straight up.
I have a curved roof. What do I use for the Mini Speedmount?

Go with our Swivel Leg Mount Adapters. Each leg gets independent movement so the mount can conform to a curved surface and sit flush without rocking.
I have a Ford with an aluminum roof. Will the Mini Speedmount work?

Attaching the Mini Speedmount on a Ford roof, most Ford trucks newer than 2016 have an aluminum roof, which is non-ferrous, so you've got a few options depending on how permanent you want the install:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.

Yes, the Mini Speedmount will hold if you choose one of the above.
Can the Mini Speedmount go through a car wash?

We don't recommend it. The mount is built to handle weather and road grime, but automatic car washes put extra stress on the dish and attachment points with high-pressure jets and rotating brushes. Remove the dish (and the Mini Speedmount if you're going through a touchless or brush wash) before you head in, then reinstall once you're out.
How do I power the Mini Speedmount?

Use our Mini 12V DC Power Cable. It's heavy-duty and low-profile enough that you can close a door on it without crushing the cable.

Available in 10ft and 15ft lengths. End options are bare wire leads, ring terminals, or a cigarette lighter plug. The cigarette lighter plug is our most popular.
Does the Mini Speedmount come with attachments?

No, the Mini Speedmount doesn't come with attachments. You pick the attachment method separately so it fits your vehicle and use case. Options include Rubber-Coated Magnets, VHB Metal Discs, VHB Adhesive Landing Pads, Heavy-Duty Suction Cups, and Swivel Leg Mount Adapters.
How do I protect the dish from falling branches or debris?

Use our Polycarbonate Cover. It's a clear, impact-resistant shield that installs over the Mini Speedmount and protects the dish from falling branches, debris, and hail. Tough enough to take a hit, clear enough to let the signal through without interference.
Do you have a guarantee?

Yes. Every TRIO mount purchased directly from trioflatmount.com is covered by our TRIO Lifetime Guarantee. If your mount ever fails, send photos or video of the issue along with your order number to contact@trioflatmount.com and we'll take care of it.