Gen 3 Standard Speedmount
White
White
White
White
White
Black
Black
Black
Black
Black
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups

Gen 3 Standard Speedmount

$275.00

106 reviews

Compatible with Starlink Standard 4

Free shipping on orders over $175.

Color: White
Complete your set up.
Description

The TRIO Speedmount is a low profile mounting solution for those wanting to mount their Gen 3 Starlink in a secure and convenient way on their van, RV, side by side, UTV, or race truck! Manufactured by industrial-grade injection molding, this mount provides protection to the edges of the dish and is extremely low profile at only 1.85” in height (1.9” with magnets). Simply slide the 4 pieces into place around the Starlink Gen 3 standard dish and tighten the 4 SS screws into the SS nylon locknuts.

This allows you to flatmount your Gen 3 dish permanently or temporarily on any vehicle: Vans, RVs, Box Trucks, Campers, Boats, Sailboats, etc. There are multiple mounting options as noted in the drop down menu (through bolt in the corners, rubber coated magnets, or suction cups. VHB powder coated steel discs available for non magnetic surfaces).

** The kickstand or pole mount still work and can be used in conjunction with the Speedmount.

** Strength: This mount has been designed to be used (and has been tested) at high speeds. It is ultimately up to the end user to make sure the antenna mount is secured appropriately.

For additional info and mounting instructions, see below.
Installation

See installation instructions here: Installation Instructions
Specifications

Assembled Dimensions:

Length: 624.5 mm (24.6”)

Width: 403 mm (15.86”)

Height: 47mm (1.85”)

Weight (~4 lbs)


Color options: White or Black

Mounting options: Through-bolt, magnets, VHB adhesive mounting pads, combination of VHB adhesive and magnets, or suction cups
Important Information

⚠ Using Starlink™ in motion may violate your Terms of Service depending on your service location. Consult your Terms of Service to determine if this applies to you.

⚠ Given the varying conditions of surfaces this can be mounted to, it is ultimately up to the end user to make sure the antenna mount is sufficiently secured. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.

Non-Flat or Ridged Roof? Read This Before Mounting

If your vehicle's roof has raised ridges or contours, any attachment may not achieve full contact with the roof surface, and full contact is required for a secure hold. Without it, the mount can detach at highway speeds. If your roof has ridges, we recommend:

  • Ensuring all attachment points are flush and fully in contact with the roof before driving
  • Testing the mount at low speeds before highway use

Not sure if your setup is compatible? Reach out before purchasing at contact@trioflatmount.com and we'll help you find the right solution.
View details
Gen 3 Standard Speedmount

TRIO Lifetime Guarantee

Read more about the TRIO Lifetime Guarantee.

Learn More
Gen 3 Standard Speedmount

Frequently Asked Questions

Will the Gen 3 Standard Speedmount hold in high winds and dusty conditions?

Yes. The Gen 3 Standard Speedmount is engineered and tested for high-wind and rough-condition use. As long as you've installed it on a clean surface and the mount doesn't budge when you give it a firm push, you're good to go. If you've chosen suction cups as your attachment method, give the suction a quick check before any drive.
I'm mounting to an aluminum surface. What attachment should I use for the Gen 3 Standard Speedmount?

Attaching the Gen 3 Standard Speedmount on an aluminum body, you've got a few options depending on how permanent you want the install. Aluminum is non-ferrous, so:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.
I'm mounting on a fiberglass roof. How do I attach the Gen 3 Standard Speedmount?

Attaching the Gen 3 Standard Speedmount on a fiberglass roof, you've got a few options since fiberglass is also non-ferrous, same setup as aluminum:

For a permanent install, use our VHB Adhesive Landing Pads. They bond directly to the fiberglass.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the fiberglass, and the magnet locks onto the disc.

Heavy-Duty Suction Cups also work if you want a fully removable setup.
Are the magnets strong enough?

Yes. Each magnet has 60 lbs of holding force, so all 4 magnets together hold up to 240 lbs. To remove them, slide them side to side with a bit of force rather than pulling straight up.
I have a curved roof. What do I use for the Gen 3 Standard Speedmount?

Go with our Swivel Leg Mount Adapters. Each leg gets independent movement so the mount can conform to a curved surface and sit flush without rocking.
I have a Ford with an aluminum roof. Will the Gen 3 Standard Speedmount work?

Attaching the Gen 3 Standard Speedmount on a Ford roof, most Ford trucks newer than 2016 have an aluminum roof, which is non-ferrous, so you've got a few options depending on how permanent you want the install:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.

Yes, the Gen 3 Standard Speedmount will hold if you choose one of the above.
Can the Gen 3 Standard Speedmount go through a car wash?

We don't recommend it. The mount is built to handle weather and road grime, but automatic car washes put extra stress on the dish and attachment points with high-pressure jets and rotating brushes. Remove the dish (and the Gen 3 Standard Speedmount if you're going through a touchless or brush wash) before you head in, then reinstall once you're out.
How do I power the Gen 3 Standard Speedmount?

Depends on your setup. We make two 12V power options for the Gen 3 Standard.

If you're keeping the Starlink Gen 3 router, use our Gen 3 12V Power Supply. It plugs directly into the router and runs it off your 12V or 24V system, saving 30 to 50 watts of waste from running it through an inverter.

If you're running an aftermarket router instead, use our Gen 3 12V Conversion Box. It eliminates the Starlink router entirely and powers the dish through a built-in POE injector, saving an additional 15 watts.
Does the Gen 3 Standard Speedmount come with attachments?

No, the Gen 3 Standard Speedmount doesn't come with attachments. You pick the attachment method separately so it fits your vehicle and use case. Options include Rubber-Coated Magnets, VHB Metal Discs, VHB Adhesive Landing Pads, Heavy-Duty Suction Cups, and Swivel Leg Mount Adapters.
Do you have a guarantee?

Yes. Every TRIO mount purchased directly from trioflatmount.com is covered by our TRIO Lifetime Guarantee. If your mount ever fails, send photos or video of the issue along with your order number to contact@trioflatmount.com and we'll take care of it.