Performance Gen 3 Speedmount
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups
all-groups

Performance Gen 3 Speedmount

$350.00

1 review

Compatible with Starlink Gen 3 Performance

Free shipping on orders over $175.

Complete your set up.
Description

The TRIO Performance Gen 3 Speedmount is a heavy-duty, precision-engineered mount built for the Starlink Performance Gen 3 dish. Designed for in-motion use, it keeps your Starlink securely in place while protecting it from every angle, whether you’re on the road, at a job site, or off-grid.

Made in the USA from marine-grade HDPE, the Performance Speedmount combines strength with a low-profile design of only 1.5” in height (1.65” with magnets). Its open-top structure preserves all Starlink functions, including snowmelt and heat dissipation, while providing easy access to ports and power connections.

With eight mounting holes, the mount offers multiple installation options for maximum stability and versatility. Choose from TRIO’s lineup of tested accessories such as Rubber-Coated Magnets, Heavy-Duty Suction Cups, VHB Landing Pads, and Through-Bolting Kits to adapt the Speedmount to any environment or surface.

To assemble, simply secure the components using the included stainless-steel hardware and hex key.

Strength: Designed and tested for high-speed, heavy-duty use. Ensure the mount and accessories are properly secured before driving.

Available in White.
Compatible with Starlink Performance Gen 3 (2025 Release)

For detailed specs and mounting instructions, see below.
Installation

See installation instructions here: Installation Instructions
Specifications

Assembled Dimensions:
Length: 25.65”
Width: 17.37”
Height: 1.5” (1.65” with magnets)
Weight: ~6 lbs

Mounting Options:
Rubber-Coated Magnets, VHB Landing Pads, Suction Cups, Through-Bolting Kits, or combination setups

Compatibility:
Starlink Gen 3 Performance (2025 Release)

Operating Temperature:
-40°F to 150°F (-40°C to 65°C)

Material:
UV-Resistant Marine-Grade High-Density Polyethylene (HDPE)
Non-Flat or Ridged Roof? Read This Before Mounting

If your vehicle's roof has raised ridges or contours, any attachment may not achieve full contact with the roof surface, and full contact is required for a secure hold. Without it, the mount can detach at highway speeds. If your roof has ridges, we recommend:

  • Ensuring all attachment points are flush and fully in contact with the roof before driving
  • Testing the mount at low speeds before highway use

Not sure if your setup is compatible? Reach out before purchasing at contact@trioflatmount.com and we'll help you find the right solution.
View details
Performance Gen 3 Speedmount

TRIO Lifetime Guarantee

Read more about the TRIO Lifetime Guarantee.

Learn More

Frequently Asked Questions

Will the Performance Gen 3 Speedmount hold in high winds and dusty conditions?

Yes. The Performance Gen 3 Speedmount is engineered and tested for high-wind and rough-condition use. As long as you've installed it on a clean surface and the mount doesn't budge when you give it a firm push, you're good to go. If you've chosen suction cups as your attachment method, give the suction a quick check before any drive.
I'm mounting to an aluminum surface. What attachment should I use for the Performance Gen 3 Speedmount?

Attaching the Performance Gen 3 Speedmount on an aluminum body, you've got a few options depending on how permanent you want the install. Aluminum is non-ferrous, so:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.
I'm mounting on a fiberglass roof. How do I attach the Performance Gen 3 Speedmount?

Attaching the Performance Gen 3 Speedmount on a fiberglass roof, you've got a few options since fiberglass is also non-ferrous, same setup as aluminum:

For a permanent install, use our VHB Adhesive Landing Pads. They bond directly to the fiberglass.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the fiberglass, and the magnet locks onto the disc.

Heavy-Duty Suction Cups also work if you want a fully removable setup.
Are the magnets strong enough?

Yes. Each magnet has 60 lbs of holding force, so all 4 magnets together hold up to 240 lbs. To remove them, slide them side to side with a bit of force rather than pulling straight up.
I have a Ford with an aluminum roof. Will the Performance Gen 3 Speedmount work?

Attaching the Performance Gen 3 Speedmount on a Ford roof, most Ford trucks newer than 2016 have an aluminum roof, which is non-ferrous, so you've got a few options depending on how permanent you want the install:

For a permanent install, go with our VHB Adhesive Landing Pads. They bond directly to the aluminum.

For semi-permanent, pair our Rubber-Coated Magnets with our VHB Metal Discs. The disc bonds to the aluminum and the magnet locks onto the disc, giving you a strong hold you can still remove later.

Heavy-Duty Suction Cups are also an option if you want a fully removable setup.

Yes, the Performance Gen 3 Speedmount will hold if you choose one of the above.
Can the Performance Gen 3 Speedmount go through a car wash?

We don't recommend it. The mount is built to handle weather and road grime, but automatic car washes put extra stress on the dish and attachment points with high-pressure jets and rotating brushes. Remove the dish (and the Performance Gen 3 Speedmount if you're going through a touchless or brush wash) before you head in, then reinstall once you're out.
I have a curved roof. What do I use for the Performance Gen 3 Speedmount?

Go with our Swivel Leg Mount Adapters. Each leg gets independent movement so the mount can conform to a curved surface and sit flush without rocking.
Does the Performance Gen 3 Speedmount come with attachments?

No, the Performance Gen 3 Speedmount doesn't come with attachments. You pick the attachment method separately so it fits your vehicle and use case. Options include Rubber-Coated Magnets, VHB Metal Discs, VHB Adhesive Landing Pads, Heavy-Duty Suction Cups, and Swivel Leg Mount Adapters.
Do you have a guarantee?

Yes. Every TRIO mount purchased directly from trioflatmount.com is covered by our TRIO Lifetime Guarantee. If your mount ever fails, send photos or video of the issue along with your order number to contact@trioflatmount.com and we'll take care of it.