Gen 3 Starlink TRIO Pole Mount

$125.00

22 reviews
Description

Keep your Starlink Gen 3 Standard dish secure with this extra sturdy pole mount.

The TRIO Gen 3 Pole Mount is a convenient option for those wanting to mount their Gen 3 Starlink in a secure and convenient way at home, or on their boat or RV. Simply press the tabs on the Starlink kickstand and slide it out, and slide in the TRIO Pole Mount until it clicks in firmly, place it over a 2” Flag Pole Buddy pole (OR Harbor Freight: 1.65”, 1.5”, or 1” poles with correct insert), then simply tighten the M6 screws to cinch the mount on the pole and you’re all set!

** If wanting multiple inserts, please indicate so via drop down option and specify which inserts in the “Additional Information” box during checkout ($10 extra per additional insert)

** We recommend to use the through bolt hole to drill out a hole in your pole and through bolt with 75mm M6 stainless hardware (available as add-on in drop down option).

Featuring stainless steel M6 screw and nylon lock nut hardware and manufactured from waterproof and UV thermoplastic that will not warp, the TRIO Gen 3 Pole Mount is built to last. It tilts the dish at an 8 degree angle to allow water run off and aerodynamic positioning. The pole mount also has a space for the Starlink cable to pass though.

** NOTE: Due to the 8 degree angle (instead of 20 degrees that the starlink kickstand gives) the app will show a notification that the dish needs to be aligned. This does not affect performance in any way in our testing.

If you already have a previous pole mount for Gen 1 or 2 Kits, use this pole mount (with or without insert) to fit on the same pole.

For additional info, see below.
Installation

If using a size adapter (1”, 1.5” or 1.65”), insert it into the pole mount. Then, place the mount/insert unit onto the pole and slide the bolt through the mount, adapter and pole. Gently fasten the bolts at the base of the pole mount by hand. DO NOT OVER-TIGHTEN.
Specifications

Overall Dimensions: 4.1"H x 7.25”W x 5.7” D

(Total height of pole mount section is 2.75”)

Inside Diameter: 2” (1.65”, 1.5”, and 1” ID inserts also available)
Important Information

⚠ Given the varying conditions of poles that this can be mounted to and rooftop scenarios/environments that this may be mounted in, it is ultimately up to the end user to make sure the antenna mount is sufficiently secured and the install is done safely. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.

Returns and Warranty

See our warranty here: Warranty
View details

Customer Reviews

Based on 22 reviews
100%
(22)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
BrontideRob
I'm using this on my sailboat

I'm using this on my sailboat. While I have yet to complete the Starlink installation and use the pole mount at sea, I have assembled the mount, using the 1-1/2" insert, onto a 1-1/2" pipe. I used a drill press to put holes in my pipe. The mount fit well. The mount seems very solid and I expect it to perform well under the harsh conditions I'm going to subject it.

S
Scott
Great Customer Service

Had a question and emailed TRIO and they got right back to me, resolved the question promptly and fully followed up to make sure it was all good. Very reassuring they stand behind their products.

C
Carol MacKusick
Wonderful!!

Excellent product with unsurpassed customer service. We needed a new mount quickly for our gen 3 while our cruising and trio delivered within two days and even followed up after to make sure we received everything,see if we had questions or if we needed help. I could not have asked for a better experience. Will certainly look at their products again should we need anything else.

Thank you Trio for a wonderful product and service!!!!!

D
Duane Ronan
Great Pole Mount

The Starling pole mount probably works ok but it doesn't have much contact with the pole. The mount is very deep for the pole insert plus you drill a hole through the pipe and the mount will never come off. Excellent design

N
Norman Kennard
Mount and black box.

Both were easy installation and have worked flawlessly. Used the 1" insert to install on a stainless pipe attached to the davits on my sailboat. Nice clean look. Thanks.

Load More