Gen 3 Standard Flatmount
Description
The TRIO Flatmount is a low profile mounting solution for those wanting to mount their Gen 3 Standard Starlink dish in a secure and convenient way on their boat, RV, or vehicle. Simply press the tabs on the Starlink kickstand and slide it out, and slide in the TRIO flatmount until it clicks in firmly and you’re all set!
The Gen 3 TRIO Flatmount is intended for permanent or temporary installation on any vehicle: Vans, RVs, Box Trucks, Campers, Boats, Sailboats, etc. There are multiple mounting options as noted in the drop down menu.
NOTE: If you have a curved roof, the mount itself has slight flex but you may need to use our swivel leg adapters for maximum surface area contact when using rubber coated magnets, VHB landing pads, or suction cups. Please add to your order if required.
** Release Lever: Fixed mount options (through bolt and VHB adhesive) include our custom designed lever to allow easy removal of the dish from the mount when desired. This allows the user to quickly remove it from the vehicle and reinstall the starlink kickstand to deploy in another location (e.g. to use at home or away from vehicle when parked under trees)
** Strength: This mount has been designed to be used (and has been tested) in normal driving conditions and turbulence but it is recommended to install behind another item (e.g. AC unit, storage box, etc) for wind dampening and to protect the dish. It is ultimately up to the end user to make sure the antenna mount is secured appropriately. If fully mounting in a fully exposed location and/or using at highway speeds or faster we recommend our Gen 3 Speedmount.
For additional info and mounting instructions, see below.
Installation
Specifications
Returns and Warranty
I will recommend people to buy this product.
Works great, very solid
The Flatmount is working as expected, very solid connection to the roof and with the Starlink. I have adequate wind buffering so I went with this model (even though it is rated at 55 mph) and I don't drive at excessive speeds (normally :D). So far so good! I love having Starlink Roam on all the time! Customer service on point! 🐈⬛
Video with the Flatmount installed:
https://www.tiktok.com/t/ZTMJFK6Ar/
https://www.instagram.com/reel/DOR_-_IjXa7/?igsh=NGJwM2VwNGhmNGti
Variant: 46023886700780
Easy install. Low profile keeps Gen 3 out of wind atop 5th Wheel. Great cjstomer service.
The Gen 3 Standard Flatmount with Rubber Coated Magnets installed easily on the roof of our pickup. The dish is oriented parallel to the roof, and id affixed strongly. I particularly like that the mount can be removed from the roof and reinstalled easily. I recommend the Gen 3 Standard Flatmount with Rubber Coated Magnets.
