Heavy Duty Suction Cup Mounts
all-groups
all-groups
all-groups
all-groups
all-groups

Heavy Duty Suction Cup Mounts

$200.00

4 reviews

Free shipping on orders over $175.
Description

Set of 4 replacement heavy duty suction cups for use with TRIO mounts for high speed, exterior, or extreme use.

4.5” diameter, 2" high. M6 female threads.

Holding Force: 65 lbs each

NOTE: If you have a curved roof, the mount itself has slight flex but you may need to use our swivel leg adapters for maximum surface area contact when using rubber coated magnets, VHB landing pads, or suction cups. Please add to your order if required.

See installation instructions below.
Installation

Suction Cup Mount:

1. Feed bolts through spaces at each of the 4 feet on the TRIO Flatmount

2. Thread the screws into the landing pads and tighten using the allen key supplied.

3. PLEASE NOTE: The mounting substrate that your suction cups will be stuck to should be non-porous, clean, and smooth. Inspect the suction cups to ensure they too are free of dirt and debris.

4. Place the TRIO flatmount with suction cups onto the freshly cleaned surface. THE TRIO FLATMOUNT LOGO (AND DISH CORD) SHOULD BE POINTED TOWARDS THE BACK (TRAILING EDGE) OF YOUR VEHICLE/BOAT ETC.

5. To attach, apply gentle downward pressure on the suction cups to ensure that the entire edge of the cup is touching the surface. Then, simply press the pump repeatedly until the colored indicator band completely disappears.

6. Click the Starlink into the TRIO Flatmount and make sure it is secure… and enjoy your internet!

** To remove the cups, lift the edge of the vacuum pad away from the surface by pulling either of the tabs on the top of the vacuum pad up and towards the center of the vacuum mount. You’re really just trying to lift the edge of the vacuum pad up off the mounting surface, which breaks the seal and lets you remove your mount.

IMPORTANT NOTE: Many factors beyond TRIO Flatmount’s control and uniquely within user’s knowledge and control can affect the use and performance of a mounting product in a particular application. Given the variety of factors that can affect the use and performance of a TRIO Flatmount product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Please note that suction cups should be checked for suction every 24-48 hours.
Warranty

See our warranty here: Warranty
View details
Heavy Duty Suction Cup Mounts

TRIO Lifetime Guarantee

Learn More

Frequently Asked Questions

What are the Heavy Duty Suction Cups used for?

The Heavy Duty Suction Cups mount your TRIO mount to smooth surfaces with no drilling. They come as a set of four and hold 65 lb each, over 260 lb total. Stainless steel hardware is included.
Are the Heavy Duty Suction Cups made for outdoor use?

Yes, the Heavy Duty Suction Cups are built for exterior mounting on smooth, non-porous surfaces. Clean the surface first and make sure each cup sits flush with full contact.
How often should I check the Heavy Duty Suction Cups?

Check the suction on each Heavy Duty Suction Cup every 24 to 48 hours, especially before and during travel. A quick reset keeps the hold strong.
Can I use the Heavy Duty Suction Cups on a curved surface?

Yes, the Heavy Duty Suction Cups conform to a slight curve of about 1 to 2 degrees. Pair them with Swivel Leg Adapters for full contact on curved or angled surfaces. Each cup needs to sit flush to hold.
How strong are the Heavy Duty Suction Cups?

The Heavy Duty Suction Cups are industrial-grade vacuum pump suction cups, not lever-style glass cups. Each is rated for 65 lb, over 260 lb combined across four. A built-in vacuum indicator lets you confirm suction visually.
What surfaces work best with the Heavy Duty Suction Cups?

The Heavy Duty Suction Cups work best on smooth, non-porous surfaces: glass, smooth fiberglass, smooth painted metal, and gel coat. The surface should be clean and free of dirt, wax, and debris.
Can I use the Heavy Duty Suction Cups on a vehicle roof?

Yes, the Heavy Duty Suction Cups work on a vehicle roof with a compatible smooth surface. They are made for vehicle, RV, marine, and other exterior mounting.
Can I use the Heavy Duty Suction Cups on a boat?

Yes. The Heavy Duty Suction Cups are common on boats and other marine applications with smooth, non-porous surfaces.
Do the Heavy Duty Suction Cups come with mounting hardware?

Yes, the Heavy Duty Suction Cups include stainless steel mounting hardware in every set.
Are these replacement suction cups?

Yes. These are replacement Heavy Duty Suction Cups for compatible TRIO mounts.
What size are the Heavy Duty Suction Cups?

The Heavy Duty Suction Cups measure about 4.5" in diameter and 2" in height.
Do the Heavy Duty Suction Cups use threaded mounting holes?

Yes. Each Heavy Duty Suction Cup has M6 female threads for compatible TRIO mounts.
How do I know a Heavy Duty Suction Cup is fully attached?

Press the pump until the colored indicator band disappears. That confirms the vacuum seal.
How do I remove the Heavy Duty Suction Cups?

Pull a release tab to lift the edge of the pad and break the seal. Then remove the mount.
Do I need to clean the surface before installing the Heavy Duty Suction Cups?

Yes. The surface and the Heavy Duty Suction Cups should be clean and free of dirt, dust, oil, and debris.
Can I leave the Heavy Duty Suction Cups installed long term?

Yes. Check the suction every 24 to 48 hours and clean the Heavy Duty Suction Cups and surface periodically for maximum hold.
Do the Heavy Duty Suction Cups require drilling?

No. The Heavy Duty Suction Cups are completely non-invasive with no permanent modifications.
Can I move the mount between vehicles?

Yes. The Heavy Duty Suction Cups can be removed and reinstalled on other compatible smooth surfaces.
Which should I choose, Rubber Coated Magnets or Heavy Duty Suction Cups?

Rubber Coated Magnets are best for magnetic steel surfaces. Heavy Duty Suction Cups are best for smooth, non-porous surfaces where magnets cannot be used. Both are removable and need no drilling.